Shade printing in bag
The prime road to print on canvas Homewards is with Shade printing, Frequently called printing with silkscreen. A screen print on canvas can cook a fine mannequin examine sharp. Many artists and account the Shade printing advance to discover and outline of their drawing on canvas before and/or after applying emulsion.
Instructions
1. Produce your materials. A well-stocked Craft service store can sell you all the basic Shade print materials required for a incomplex national workshop. Be definite to comparison shop, as the prices may vary dramatically. Again evaluation with your community industrial screen print supplier, listed under Shade printing supplies in the telephone jotter or online.
2. Disinfected your extended frame with gentle soap, rinse and let it dry for at least an period. Coat the Shade with light-sensitive emulsion. Consult the fluorescent emulsion idea for the prime cloudless conditions applicable to your emulsion. If you draw on vellum with India ink, go over your lines or brushstrokes twice to ensure opacity.4. Place your foam rubber on the floor or a table. Put your coated screen frame over it on the inside side of the frame, leaving the flat top pointing up.
Inkjet printers often do not create an opaque enough image for burning a screen. Take care when using a laser printer. Some laser printers are too hot, and will melt vellum. Let the coated Shade thoroughly dry overnight.3. Settle your Craft or design on a transparency. Either draw with India ink on translucent vellum, or print the design on vellum or other heavy transparent paper on a laser printer.
Put your transparency upside down on top of the screen. Put your piece of glass over the transparency down, and weight it at the edges with books or some other heavy objects. If you have ink cans, they will do fine because they are heavy. Hang your light source about 18 inches above your screen and turn it on for recommended exposure time. Develop with warm water. If your screen doesn't develop, use more water pressure. If your emulsion comes off too easily, increase your exposure time.
5. Let the screen dry. Put it over the canvas and add ink to one side of the screen, creating an “ink reservoir." Holding the screen frame down firmly, pull two or three strokes and lift to check your print. Clean the screen immediately when finished. You can do multiple prints. If your print smudges, try a finer screen mesh. If insufficient ink gets on the canvas, use thinner ink or a more open screen mesh.
