Thursday, June 4, 2015

Help Make Your Own Wooden Frames

Are you Very tired from trying to acquisition the entire wooden frame for one of your fiancee, nevertheless abnormal sized pictures? Or refuse to wages the outrageous worth that is continuance asked for one? Discharge you know make your own wooden frame? It actually does not retain to be all that complicated or expensive, unless you fancy it to be. There are legion occasions that you may extremity to discern practise a wooden picture frame of your mere own. The steps required to memorize adjust your own wooden frame are detailed here and are express intelligible to go after. Interpret on to memorize how you can bring about it.


Instructions


1. Degree your picture on top and sides and beget sign of the sizes. Memo: Provided you are going to blaze your picture in a mat board that is larger than the actual picture, use the measurement of the mat board in place of the picture. Remember this is the inside size, so you have to add the width of the molding to receive the outer edges actual size.


2. Purchase your wood for the frame. The easiest wood to use for a picture frame is specially made picture frame moulding, which already has the needed groove in it for inserting the glass. If you use other wood, you will have to create this groove yourself with a router. Buy enough wood needed for your frame. It is usually a good idea to buy it a few inches longer than needed To admit for corner adjustments. Cut these into four pieces.


3. Use a miter box to chop each piece at a 45-degree angle. Note: If you have a large picture, you may want to also use dowel plugs, staples or small nails to secure the corners better.5. Remove clamps and sand any rough spots on the wood.


Once all are cut, arrange them together to check the fit and make any needed adjustments.4. Use the corner clamps and wood glue To button up together the four corners. Wipe off any excessive glue and allow it dry with clamps on it.


Paint or stain your frame the color you desire. Finish off with a clear wood finish. Allow it to dry.


6. Attach the picture hanger to the back center of the frame.


7. If you desire glass, fit it into the grooved area of the frame. Add the picture and complete the frame with a piece of cardboard stapled to it.