Wood engravings were traditionally used in printing. Artists carved a lot of wood so that the raised surface had the constitution. The wood surface was then saturated with ink and pressed onto the paper, transferring the arrangement. While the legend of wood engraving is advantageous, nowadays's artist can practice a combo of techniques to carve a delineation on a quantity of wood. Here is how you can effect it.
Instructions
1. Sand your wood surface so that it is smooth Sufficiently to cause a cultured engraving. Remove any excess dust with a brush or Disinfected rag.
2.7. Remove wood dust from your engraving with a brush or clean cloth.
3. Training your design with India ink and pen on drawing paper. Also called Chinese ink, it is used for drawing, calligraphy and tattoos. It can be tricky to use if you're not used to it. Dip your pen into the jar of water, blot out excess water on a paper towel, dip into the ink and blot out the ink before drawing.
4. Make your design on the wood surface. Remember to blot out water and ink before applying to the wood since it is not a paper surface that is easy to replace.
5. Leave your work aside for at least a day so you can view it with fresh eyes when you carve it out.
6. Use your engraver to carefully carve the design into your piece of wood. Remember to shine the light and adjust the magnifying glass so that you can see details.
Luminosity your light on the wood surface. Benefit a magnifying glass attached to the headlight whether you endure it is expedient. Wood engraving is precise job and you must to be comfortable studying details over a stretched margin of date. You can catch positive lamps with magnifiers in Craft and Art stores.
