Are you beat of walking into your scullery or bathroom and seeing the alike ancient device every date? Whether you are, then possibly it is period to bestow the margin an amend. Something as manageable as adding a dewy color--or a recent coat of an aged color--makes a chock-full aberration in a interval's appearance. Delineation cupboards is an inexpensive contrivance to ante up a virgin bad eye to a drab amplitude. Applying the different gloss with a foam brush gives the finished surfaces a satiny smooth appearance.
Instructions
1. Agape the cupboard doors. Allot the screw heads on the back side of the doors. Incorporate the bit of the screwdriver into the mind of the screw and turn counterclockwise until the hardware comes off. Make sure you deposit the hardware and screws where you Testament be able to asset them when you are finished.
2. Corner the bucket on a Apartment lodgings surface and pour lukewarm bathe and borax into it. Place the rubber gloves on and dip the scratchy sponge into the solution. Using a primer/sealer instead of one that is only primer will do a better job of covering any stains that did not wash off in Step 2.6. Dip the foam brush about 3/4 inch into the paint.
Put drop cloths or newspaper on any other surfaces you want to protect--such as countertops or the floor.
4. Wrap the sandpaper around the wood block. Hold the block firmly at the sides and sand the entire surface you are going to paint. Use small strokes that follow the grain of the wood.
5. Open the primer/sealer and stir it with a stir stick. Squeeze the excess water out of the sponge and wash the surface that is going to be painted.3. Mask the places where the cupboards touch the ceiling, walls or floor by sticking the tape on the surface you want to protect from excess paint. For instance, the tape should be stuck on the ceiling running right along the edge of the cupboards.
Lift the brush up and wipe off excess primer on the edge of the container so it drips back in with remainder of the primer.
7. Apply a generous coat of primer to the cupboards using short, smooth strokes. Dip the brush in the primer whenever the brush starts to look dry. Let the primer dry completely before continuing.
8. Open the paint can and repeat Steps 4-6 using the paint instead of the primer. Make sure the paint is completely dry before reinstalling the hardware.
