Whether you can compose (or you hold ready-made black-and-white images), you should be able to tint graphics. While there are a unusual tricks involved in choosing the honest materials and getting the colours to case condign so, the incomplex, bold images that cook up most graphics are de facto even easier to effort with than most types of illustration.
Go over the outlines with a black pen to give your graphics a crisp look. Even if you started with an ink drawing, going over the lines after you paint the graphics generally makes a piece look cleaner.6. Wait for your work to dry completely, then go over the entire page lightly with a large eraser. It is very easy to leave almost imperceptible pencil or dirt smudges while working, so this step often makes the graphics look cleaner.
The type of paper that comes in most tablets is positive; you're basically equitable looking for something a elfin heavier than typing paper so that it can stand up to the tint. Provided you already get a delineation, hint it onto choice paper, or as a carry on resort, photocopy it.
2. Dye the graphics with gouache, starting in the largest areas of your picture to receive a sensation for the stain and brushes. Gouache is normally ready to be used straight out of the tube. Use medium-sized brushes to fill in large areas and small pointy or flat brushes to carefully paint near the lines and in other tight areas.
3. Wait for the gouache to dry, then see how it looks. If the color looks thin or patchy, paint on another layer, at least in problem areas. Gouache is an excellent media for painting graphics because it can create a very smooth, flat look, but sometimes it takes a few coats to receive this right.
4. Touch up any mistakes. First, wait for the gouache to dry completely. Lightly sand the area with a very fine grade of sandpaper, being careful not to damage the paper. If that doesn't work, paint over the mistake in white, wait for that to dry and then paint over it again with another color if appropriate.
5.
