Spraying latex colouring can be a messy afafir.
Prime your airless sprayer by running clean water through it, then run the latex paint through. Depending on the type of sprayer you're using, you will either fill a paint hopper attached to the sprayer, or dip the paint pick-up tube into the bucket.5. Practice your spraying technique.
Instructions
1. Include and mask everything, since latex dye can drift across a space, or nearly across your driveway, as you distemper. Adoption a fist masker, a beneficial object that allows you to quickly and accurately application masking tape and paper or plastic across windows, encompassing lights, and anything else you duty to protect. Adoption Blop cloths or plastic sheeting to encompass the floor and bulky objects.
2. Thin the dye. Most latex dye can be thinned by approximately a pint of doctor per gallon of dye for spraying, nevertheless proof the title for instructions. For some smaller cup or hand-held sprayers, you must thin the paint or it will be too thick to spray properly.
3. Strain your paint, even if it's coming out of brand new cans. Pour it through a paint strainer or pair of nylons into a clean bucket.
4.Muggy sprayers come in sizes from mini hand-held models to almighty machines that can pump elsewhere nearly 2 gallons per minute. Ambidextrous machines can spray everything from lacquer to thick masonry stain. All stuffy sprayers can pump latex paint--or latex primer or stain. The trick to representation with latex is not particular in your spraying technique and spray "gun administration" nevertheless in preparing the tint, preparing the surface and most importantly, protecting succeeding areas from over-spray.
Hold the gun about 18 inches from the surface, and start moving your hand just before you pull the trigger. Keep the gun perpendicular to the surface, spray about a 3-foot section, and release the trigger just before you stop moving your hand.
6. Work in sections from top to bottom, overlapping each spray pattern by about one third. It's always best to paint two thin, even coats than one heavy coat.
7. Prevent the paint from drying out when you take a break. Drop the spray gun in a bucket of water, and cover the sprayer and paint with plastic sheeting. If it's hot, move the sprayer into the shade and pour a little water over the paint in the bucket to keep it from skinning over, then cover it with plastic.
