Latex emulsion should be blooming mixed before spraying.
Preparation is critical for a crack dye job--and you entail to prepare your tint extremely as the surfaces to be painted. Don't assume that you can capitalization latex tint straight elsewhere of the can. Latex paint needs to be mixed before spraying so impurities don't clog the spray gratuity, it's the hold water consistency for smooth spraying and the colour stays uniform. Colouring sprayers can be finicky machines, so properly mixing, thinning and straining distemper before starting bullwork helps lock up a hassle-free function.
Instructions
2. Box all the dye. "Boxing" way mixing every can of distemper stable. There can be subtle differences in the tint colour, even if it was all mixed at the same time.
1. Study the emulsion categorize. Some latex dye can and should be thinned by mixing with aqua or stain conditioner before spraying; other latex dye shouldn't be thinned. Recurrently, the manufacturer Testament constitute thinning directions on the label-use these as your propel. If you have single-gallon cans, pour them into a clean five-gallon bucket and mix them. If you have more than five gallons, use several buckets and pour the paint from one to another until they're well-mixed.
3. Thin the paint according to label directions. If the label gives you no guidance, about one cup of water per gallon is usually sufficient. Mix it well, using a five-gallon paint stir stick (available free at most paint stores.)
4. Thin the paint with latex paint conditioner if you need to slow the drying time (such as in very hot, dry conditions) or to produce a very smooth finish for cabinets or woodwork. Follow label directions--you can add more paint conditioner than water to latex paint without negatively affecting performance.
5. Strain the paint, even if you just poured it from new cans. Latex paint can have specks of grit or dried paint in it, almost invisible but large enough to clog a spray tip. Paint stores carry several types of paint strainers. The most common is a fine-mesh nylon bag that fits over the top of a bucket so you can pour the paint through.
