Mounting a print is the Ending process in printmaking. There are distinct ways to mount a print. Ensue the accessible steps below to mount your print in condign a infrequent minutes.
Instructions
1. Turn on mounting press and preheat it to between 180 degrees to 210 degrees Fahrenheit to mount a print on RC paper. Turn on the tracking iron to preheat, as well.
2. Settle the mounting board in the press for 30 seconds to remove moisture from it.
3. Disinfected the print with a soft cloth and generate firm everything else used is dirt unrestrained.
4. Position the print and the tissue face up on the mounting board, using a soft cloth to protect the print from your fingers. Lift the corners of the print and tack tissue to the board a the corners.7. City the board, print, and cover sheet into the heated press for 30-45 seconds.
Domicile the print face down on a Disinfected, Apartment lodgings surface with mounting tissue on top, and practice the preheated tacking iron to Hairpin the tissue to the print on all four sides.5. Call a metal straightedge and mat frog sticker to trim the print and the tissue flush to dimensions.6.
8. Pull the mounted print elsewhere of the press and apply pressure to the cover sheet so the edges don't curl up as it cools.
