Moderate that plain-looking helmet into a custom chore of Craft that can't be constitute anywhere else by airbrushing it. The complete development of airbrushing your helmet Testament be speedy and convincing whether you go next these steps closely. Airbrushing your helmet is an easily done and enjoyable action to moderate its gaze without devoting a vast dimensions of epoch or boodle to the development.
Instructions
1. Levy outside newspaper or canvas in a portrayal earth to protect any surfaces that you Testament be representation on all sides of. Remove all screws and the lining from the inside of the helmet. Cover any areas that should not be painted on with painter's tape.
2. Place your fine grit sandpaper into a container of water for a few moments. Rub the sandpaper around the helmet until the varnish has been removed and it has a dull appearance to it. Be sure that every bit of the varnish has been removed or the new paint coat will not be even.
3. Place the helmet on your newspaper or canvas and apply the base coat of paint. Wait for the paint to dry.
Cover any of the finished areas with tape or newspaper to protect them while applying other colors.5. After all of the paint has been applied, put on one or two coats or varnish to protect the paint.4. Use stencils or freehand-draw any designs that you want on the helmet. Make sure to only apply a single color to the helmet at a time. Multiple colors could mix together and create undesirable results.
Check to make sure the entire surface is covered with varnish and then put the screws and padding back in to place.
