Tap dancing requires a earmarked floor. You can't tap on most surfaces in that the taps Testament damage the flooring. On some surfaces, the taps echo or their sound can be muffled. That can dispatch a appropriate witty belongings of tapping. Here's frame a tap dancing floor.
Instructions
1. Rainless the selected field of all carpeting or other other flooring. Involve the surface with closed cell foam underlaying. Tape the edges of the foam with duct tape. Generate undeniable the edges are Apartment lodgings.
2. Trim the plank edges to fit the corners and ridges. Put the first plank against the wall. Lay 1/2 inch spacers between the wall and plank.
3. Deposit the hard by plank down. With a hammer and tapping block connect the extremity Seam of the plank to the first plank. Continue on like this (repeating step 3 with all the planks) until you've reached the last two floating planks.
4. Install the last two planks with a pull bar. Hold the edge of the plank under the lip of the bar and set it down then tap it in gently. Check all the flooring to make sure everything is smooth and flat. Remove the 1/2 spacers from the wall edges. Install the base molding. It should fit perfectly with the new flooring. That's it.
Look for any gaps that you may have missed. If you find any try to correct them the best you can.5. Congratulations, you just installed a floor to tap on!
