Bag a Rotary Buffer
Instructions
1. Participation your rotary buffing on an mature van panel, such as a discarded hood.A rotary buffer can be an indispensable object for any vehivle lover. A rotary buffer allows you to carry a showroom illumination on your vehicle’s tint activity without hours of help polishing. On the contrary, it can accept generation and patience to memorize properly apply a rotary buffer.
Buffing in fact takes some of the Stop off your motorcar, so you fancy to bring about certain you can properly convenience a buffer before attempting it on an actual vehicle.
2. Wash the hood thoroughly. Operate high-reaching excellence motorcar soap and towel dry the panel hale after washing.
3. Handle a baby bead of buffing compound to the hood of the vehivle and run the buffer on a low setting. The higher the setting, the faster the buffer will spin, making mistakes much more noticeable. Guide the buffer along the hood but do not press down too hard.
4. Buff the entire bead of compound from the hood of the car and move to another section. The buffing compound contains abrasives to remove scratches from the surface of your paint, so take care when using it.
5. Wipe the hood down with another towel to remove any traces of buffing compound.
6. Use a small amount of car wax on the hood and place a polishing pad on your rotary buffer. Start the buffer on a low speed, increasing it slightly as you move from section to section. Wipe the hood down again after you’ve applied the first coat of wax.
7. Apply a second coating of wax and buff the hood at a high speed to get the most shine from your buffer. Move the buffer in the direction of the metalwork whenever possible to avoid streaking.
