Monday, September 28, 2015

Build An Aura Brush Booth

Airbrushing


Picture with air brushes requires knowledge and worry to the surrounding nature. Airbrushes tend to ooze dye in a useful mist of spray that is sometimes poisonous. To protect yourself and the environment, advantage an airbrush in a booth. The booth Testament protect you from gloss particles and aid reason the distemper. Building an airbrush booth is potential with a amplitude, a window and regular materials inaugurate encircling the box and at a usual family improvement store.


Instructions


1. Position a card table against a window so that it fits evenly against the window sill. A average card table is approximately 30 inches flying. Whether the window is higher than 30 inches, convenience a rare pieces of plywood on top of the table to make it fit flush against the windowsill.


2. Cut and measure the plywood the same dimensions as the square box fan. Build an open-ended box with the four sheets of plywood -- left side, right side, top and bottom. Make sure that it covers the entire face of the fan.4. Insert the fan into the plywood box so that the front of the fan faces the window. Glue the fan to the inside edges of the plywood box.


Secure the plywood together using wood screws. Place the finished box onto the card table facing the window.3. Tape the furnace filter to the front of the square fan with duct tape.


Once the glue dries, place duct tape around the fan and front of the plywood box to ensure a snug fit.


5. Open the window enough so that it aligns with the height of the plywood box. Push the plywood box with the fan/filter flush into the window.