The outer column and interior of a die shorten can be dry embossed.
Dry embossing gives an appealing appearance to a die reduce that is to be used for a scrapbook arrangement, greeting card or paper Craft project. An embossing effects is held still allied a pen or pencil. It is used to press or emboss lines or patterns into a surface to generate indentations. The object generally has two ends, Everyone with a little stainless steel ball that measures 1.1 mm and 1.8 mm. The smallest steel ball works great for petty indentations and outlines while the extensive ball is worthy for filling in a shape.
Instructions
1. District the embossing stencil onto the flash box or embossing station. The die chop should be placed appropriate side down onto the stencil remarkably provided it is textured or patterned paper or card inventory. The go side of the paper will have the raised embossed surface on it after the way is imperforate.3.
Secure the stencil in settle with two pieces of detachable tape.2. Field the die abbreviate on top of the stencil.
Crumple a slender piece of wax paper. Rub the wax paper encompassing the die cut. This will help the embossing tool to move easily over the die cut.
4. Place the die cut over the stencil. Turn on the light box switch. You will be able to see the stencil pattern through the paper unless the paper is very dark. You will have to depend on the feel of the stencil outline with your fingertips if the stencil is not visible with the aid of the light.
5. Place one end of the embossing stylus tool against the paper and gently press down. Fill in the outline of the stencil pattern by slowly rubbing the paper with the tool. You will use a motion similar to coloring as you fill in the shape. You can choose to make the outline only or fill in the entire shape.
