Repaint a faded machine bumper to bring back the automobile's lustre.
Many newer models of vehivle come equipped with plastic bumpers. Over era, the colour of the bumper can originate to fade due to sun exposure. A bumper may and metamorphose scratched by a babe accident and lack a virgin coat of dye. It is viable to repaint a automobile bumper Homewards to avoid a potentially costly holiday to an automotive mechanic. The emulsion should be applied in a bushy-tailed ventilated environment and the painter should wear a ventilator and safety goggles.
Instructions
1. Remove the bumper from the automobile. Depending on the cause and representation, there may be screws or bolts holding the bumper. These must be removed before the bumper can be taken off.
2.11. Apply an automotive rubbing compound to a foam polishing pad and rub the surface of the bumper to enhance the luster of the paint.
Remit the bumper to dry and sand the surface to be painted with 120-grit sandpaper. This Testament prepare a Rugged surface that Testament exceeding easily clutch primer and stain. Swab absent sanding dust with a Hairpin cloth.
4. Utilize a thin layer of spray automotive primer to the bumper. Grasp the spray can 6 to 8 inches from the bumper and shift it back and forth to supply a also even coat.
5. Allow the coat to dry and apply a second. After this second coat has dried, lightly sand the surface with 400-grit sandpaper to remove any drips. Wipe the bumper with tack cloth to remove any dust.
6. Apply a thin layer of automotive paint to the bumper, once again holding the can 6 to 8 inches away and using a back and forth motion to cover the bumper evenly.
7. Continue to spray light coats of basecoat over the bumper until it is completely covered. Allow the bumper to dry for 30 minutes.
8. Apply a layer of clearcoat mixed with hardener. These can be bought at automotive supply stores and mixed according the package directions. Allow the first coat to dry and apply a second.
9. Allow the bumper to dry overnight and reattach it with the original screws or bolts.
10. Lightly sand the newly painted bumper with 1500-grit wet sandpaper. Dry the surface of the bumper with a soft cloth and resand any areas that appear rough.
Disinfected the bumper with a soft cloth soaked in soapy drench. This Testament remove any dirt, grease or grime that may be on the bumper.3.
