Emulsion Encircling a Picture
5. Paint around the stencil. Remove the stencil when finished to ensure that there were no leaks. If there were leaks, clean the area immediately. By using a stencil, it is potential to coin the consummate shape encircling the dead ringer. The shape can be customized to receive after to the picture or cater extension sorrounding the image.
Instructions
1. Place the tracing paper over the picture which will be painted around. Use a pencil to trace the outline of the picture. This tracing can be enlarged or modified if you desire space around the image.
2. Cut the shape of the image out of the tracing paper. This is not necessary as it is possible to simply cut into the foam board and use the tracing as a guide. However novices or less artistically inclined persons may find it helpful to transfer the pattern to the cardboard by tracing around it on the cardboard itself.
3. Use the razor knife to chop the cardboard to shape from the tracing pattern.
4. Affix the cardboard pattern to the original picture to be painted around with the tape. Check to make sure that the fit is accurate and that no part of the original can be seen behind the pattern. The process may need to be repeated if the stencil is not accurate.
Creating a line for a picture or photograph can be challenging. To preserve the honestness of the original picture, it is determining to protect it from any Category of whitewash or other materials that could damage it. The chief mode to stain any borderline enclosing a picture is a easy stencil means.
