Fiberglass is used for many matters.
Repeat the application process of the matting. Place three to ten layers of matting on the mold, until the desired thickness and strength is achieved.7. The funds used in fiberglass operate is not authentic challenging. But, it does miss patience and a quantity of experience to arrange tool with fiberglass.
Instructions
MDF and Fleece
1. Degree and chop pieces of MDF with a epigram, according to the extent and shape of the fiberglass project. Assemble the frame with screws and a screwdriver.
2. Drape a lightweight fleece over the top of the frame. Starting in the middle, stretch the fleece and staple in place. Cut away any excess fabric.
3. Place the mold on a drop cloth. Put on your safety goggles, dust mask and gloves.
4. Follow the package instructions on the resin. Pour the resin into a bucket. Apply a coat of resin over the fleece. Allow the resin to dry.
5. Apply another coat of resin over the first layer. Place the fiberglass mat on the wet resin. Apply a coat of resin over the matting. Repeat the process until the mold is covered with a layer of matting.
6. Allow the resin to dry.Fiberglass is a flexible building utility. Fiberglass mats and resin are combined to cause durable, long-lasting products of any magnitude. Unlike other materials, such as metal and wood, fiberglass can mould to altered shapes. Fiberglass is used in house projects, marine applications and vehivle audio, thing kits and panels.
Foam
8. Cut the foam with a craft knife to form a mold.Apply the body filler and allow it to dry. Sand the surface of the fiberglass and apply another layer of body filler. If you are painting the fiberglass project, first apply a coat of primer, then the paint.
Finish rough surfaces and edges with sandpaper.
9. Place the mold on a drop cloth. Put on your safety goggles, dust mask and gloves.
10. Set the matting on the surface of the foam. Follow the package instructions on the resin. Pour the resin into a bucket. Coat the matting with resin. Allow the resin to dry.
11. Repeat the application process of the matting. Place three to ten layers of matting on the mold, until the desired thickness and strength is achieved.
12. Apply the body filler and allow it to dry. Sand the surface of the fiberglass and apply another layer of body filler. If you are painting the fiberglass project, first apply a coast of primer, then the paint.
Pre-made Mold
13. Coat the pre-made mold in a mold release wax. This allows the fiberglass shell to slip off of the mold when it is finished.
14. Place the mold on a drop cloth. Put on your safety goggles, dust mask and gloves.
15. Follow the package instructions on the resin. Pour the resin into a bucket. Apply a coat of resin on the mold. Allow the resin to dry.
16. Repeat the application process of the matting. Place three to ten layers of matting on the mold, until the desired thickness and strength is achieved.
17.Apply the body filler and allow it to dry. Sand the surface of the fiberglass and apply another layer of body filler. If you are painting the fiberglass project, first apply a coast of primer, then the paint.
