Shorten finished seashells to constitute a necklace.
Collecting seashells on the beach is a common pastime on vacations. Moreover to freestanding decorations, seashells can be used for a discrepancy of crafts, such as seashell bouquets, cameos, candles, wreaths and mirrors. One Art that uses seashells is jewellery, such as necklaces. This Art ofttimes requires that the shell be section in codification to berth a chain or limit down the shell. District a diamond drill bit or a tungsten carbide drill bit on either a Dremel drill for diminutive holes or a tungsten carbide cutter for larger holes or shape cuts.3. Fill a bowl with chill baptize and dip the gratuity of the drill bit into the water. Do not get your drill or tungsten carbide cutter wet.
Hire a shell you would approximative to chop. Grab a uncommon additional shells in example you constitute a flub during the fashion.
2. Seashells are too Dainty and thus easily breakable, so the best kind arrangement for cutting a seashell is to benefit a Dremel drill with specialized bits.
Instructions
1.4. Secure the shell to a old table with the top of the shell facing you, using strong tape. Place the tape over the shell in the area where you plan to make a cut, so that you can drill through the tape. This will help prevent the shell from cracking.
5. Put on a mask and goggles to prevent any dust or particles of the shell from flying into your eyes or mouth.
6. Turn the drill on, hold the drill in a straight up and down position, and place the drill into the tape and shell firmly. When a small puddle of water begins to form in the hole, remove the drill from the shell. Repeat the drilling until you reach through the shell. Be careful not to drill through the table. Short, firm drills like this will help to keep the shell from splitting. If you are using a tungsten carbide cutter, also use in short, firm motions to form a larger hole or shape with each cut.
