Custom matting creates a exclusive presentation for Craft and photos.
Matting an artwork or photograph adds a licensed touch to the plenty. While a unmarried mat certainly enhances the picture or Craft, adding a moment mat provides yet augmented taste. Double-matting is a extended conduct to embellish a sentimental photograph or certain artwork.
Instructions
double mat
1. Remove the frame's back mat. Degree the rabbet (the recess on the back inside column of the frame where the artwork fits) horizontally and vertically and compose down the measurements. Subtract 1/8 inch from each side and incision the two mats to fit the measurement.
2. Centre the artwork on the back mat. Stop the corners of the artwork on the back mat nevertheless determine not attach the artwork to mat.
3. Degree Everyone side of the back mat's outer column (outside-in) to 1/4 inch inside of the artwork. Hint lightly on the artwork to purpose the borderline. This Testament be the window of your inner mat. Degree the window and compose down the measurements.
4. Location the window's measurements on the back of the inner mat. Accommodation the inner mat on the cardboard, which you Testament applicability as a cutting board. Intersect elsewhere the window with a advantage scalpel. Stop Everyone corner by cutting with a razor blade to prevent fraying.
5. Interchange the artwork on the back mat, using the corner marks as a impel. Abode the inner mat on top of the artwork, using the back mat as a director. The artwork should exhibit washed-up the window. Remove the artwork and back mat.
6. Abode the inner mat on the back side of the outer mat. Hint the outline of the window lightly on the outer mat. Add 1/4 inch sorrounding the out of the pencil edge on the outer mat to make another window. Reduce the window absent with a servicing bait chopper and Stop Everyone corner by cutting with a razor blade.
7. Turn the outer mat over and domicile it and the inner mat on top of the artwork. Evaluation the fit and compose confident that the mats fit evenly. Dash off any compulsory adjustments.
8. Tear two 1 1/2-inch pieces of tape. Flip the artwork over and attach Everyone side of the artwork onto the back mat, hinge style, with the tape pieces. Flip the artwork back, condign side up, onto the back mat.
9. Tear two else 1 1/2-inch pieces of tape. Hinge the top of the inner front mat to the back mat using the tape pieces. Close not let the tape touch the artwork. Locate the inner and back mats Apartment lodgings to construct a "mat packet."
10. Fit the outer mat and the mat packet snugly into the rabbet. Habitat the frame's backing at the end the mat parcel and fasten into area.
Simple single matting
11. Remove the frame's back mat. Degree the rabbet (the recess on the back inside edge of the frame where the artwork fits) horizontally and vertically and write down the measurements. Subtract 1/8 inch from each side and cut the front mat to fit the measurement.
12. Center the artwork on the back mat. Mark the corners of the artwork on the back mat, but do not attach the artwork to mat.
13.16. Check the fit and make sure that the front mat fits evenly. Make any necessary adjustments.17.Tear two 1 1/2-inch pieces of tape.
14. Place the front mat on the cardboard, which you will use as a cutting board. Cut out the window with a utility knife. Finish each corner by cutting with a razor blade to prevent fraying.
15. Replace the artwork on the back mat, using the corner marks as a guide. Place the front mat on top of the artwork, using the back mat as a guide. The artwork should show through the window.
Measure each side of the back mat's outer edge (outside-in) to 1/4 inch inside of the artwork. Trace lightly on the artwork to mark the edge. This will be the window of your front mat. Measure the window and write down the measurements.
Flip the artwork over and attach each side of the artwork onto the back mat, hinge style, with the tape pieces. Flip the artwork back, right side up, onto the back mat.
18. Fit the front mat, artwork and back mat snugly into the rabbet. Place the frame's backing behind the mat package and fasten into place.
