Utilize two types of chain saws to assure a smooth, all the more intersect.
Chain adage carving transforms a elementary log into a rustic office of Craft. If you are trying to carve a woodland Person, a patriotic figure or a human face, chain axiom carving requires affliction and precision to accomplish the corollary you require. Once you keep obtained a visual reference or sculpture example for your chain aphorism carving, you can found to carve away the antagonistic spaces and fabricate the details that Testament cause your carving come to being.
Instructions
1. Slice off a baby lot straight across the width of the log. Let the segment dry in the sun for a unusual hours and peep the interior of the wood. Match the log segment with the log in the district where you shorten it off. Study any cracks that formed while it Dried apricot and where the resembling cracks are on the log. Effort to avoid these cracks while carving to prevent splitting your grind.
2. Benefit your capacious chain adage to gently part off the larger chunks of the log to articulation the basic shape of your sculpture. Foundation at the top and assemble your plan down the log, consulting your imitation or visual reference. For example, whether you are carving a raccoon, operate the sizeable chain proverb to outline the head, ears, neck and shoulders, then cut away at the excess wood as you form the body. The large chain saw will allow you to create the basic shape. Do not worry about the details, as these will be filled in later.
3. Draw in the details on the basic shape you've carved, using a pencil and your pattern or visual reference. These marks will act as guidelines for the more detailed carving portion of your sculpture.
4. Apply the tip of the small saw gently to the guidelines to score them. Trace all the detail lines with the small saw before proceeding with more cutting. Apply the edge of the angle grinder to the side of the wood to add notches for detail, if your pattern or visual reference requires it.8. Insert the 120-grit sandpaper disc into the angle grinder.
This saw will allow you To possess greater control over what you cut. Create more defined shapes by removing excess knots or leftover wood from your preliminary cut. Remove as much excess wood as possible before proceeding to the next step.
6. Place the 80-grit sandpaper disc on your angle grinder. Use the angle grinder with the 80-grit sandpaper to create the more minute details of your carving. For example, if you are carving a raccoon, the angle grinder can be used to create fur details on the head and body. Always use light, even pressure when applying passes to the wood, and use the angle grinder in the direction of the wood grain.
7. This will prevent chipping when you begin carving in the details.5. Cut the negative spaces from your pattern or visual reference using the small chain saw.
Use light, even pressure and sand the entire sculpture in the direction of the wood grain to create a smooth finish.
9. Paint the chain saw carving using oil-based paints or leave the wood natural. Allow the paint to dry. Apply one layer of a penetrating oil-based finish. Allow this to dry, then apply another coat to seal and protect your sculpture.
