Cookhouse drawer boxes are epitome solutions for creating trail in your galley drawers as they grant you to establish everything from silverwear to tea bags. These drawers again accomplish it light To cleanse the drawer, because you simply remove the box from the drawer and rub it down with a damp cloth. Emulsion or stain these wooden boxes to match your now cookhouse burden or décor.
Instructions
1. Extensive the bake house drawer and convenience the measuring tape To collect the desired immensity of the drawer box. Decide a desired heighth, length and Breadth of the drawer box, and inscribe down your measurements.
2. Compose the required pieces on a plywood episode using a pencil and ruler, picture two side panels with the heighth and width dimensions. Draw two end panels for the box using the height and length dimensions, minus one inch from the length figure. Lay the bottom piece on top of the drawer box frame, so all the sides line up evenly. Hammer nails around the perimeter, so the bottom piece attaches to the frame. Place the nails between an inch and two inches apart.
Use the sandpaper to remove any splinters from the plywood.
4. Place the two side pieces and the two end pieces on their half-inch wide ends. Create a rectangular box of the four pieces, so the front and back pieces are inside the side pieces. Use the clamp to hold this box frame in place. Hammer nails through the ends of the side pieces, so the side panels attach to the two end pieces. Remove the clamps when done.
5. Draw one rectangle for the bottom of the box using the width and length dimensions.3. Cut the five panels for the kitchen drawer box using the table saw.
