Muting a conference call
Press "##" if you want to mute all lines.2. Look for a red light to seem on the phone. This typically means the mute is active.
1. Press the "Speechless" Press-stud on your telephone. The mute button varies in its exact purpose on different phones, however all modern telephones do have this button somewhere. For some specific AT&T phones, you must press the "*" button followed by "6" to mute an individual line.Provided you are performing a convention telephone using AT&T and are talking to at odds individuals over the bell, you may at times craving to discourse to someone not on the call or assert something approximately the argument you don't require the persons partaking in the convention ring to hear. There is an evident thought for this--you can simply wordless your borderline on the phone. This blocks elsewhere all transmission from your string to the other lines.
Instructions
You may want to say something into the call to see if the other individuals on the conference call can here you. Mute buttons have been known to fail occasionally, or you may not have pressed the button hard enough, so you'll want to make sure it is active.
3. Press the "Mute" button again to unmute the call. The red light blinks off once the call has left the mute mode. You can again talk into the phone and the individuals on the other end of the line will be able to hear you. For some AT&T phones press "*" then "7" to unmute the single line, or "99" to unmute all lines.
