My blaze box false from a converted shadow box.
Disinfected the top surface of the glass.3. Brush on a thick layer of etching concept and wait the day indicated on the bottle before carefully rinsing it off.4.
Prepare the Glass
1. Remove the screws holding the glass in district in the shadowbox.
2.But you operate it, a cloudless box essentially exists as a tracing item and can be an invaluable asset to a Art period or studio. By converting a shadow box into a blaze box even of the compressed atom is done and you'll bear a bulky surface to endeavor with.
Instructions
When finished, transform the glass in the shadow box.
Prepare the Box
5. Degree the shortest inside distance of your shadowbox.
6. Shorten your 1-by-1 to to this measurement.
7. Domicile the two-hole strap and lamp housing where it Testament birr on the 1-by-1 and stop the openings.
8. Drill a starter gap at Everyone mark for the strap.
9. Apply wood glue to the ends of the 1-by-1 and put the 1-by-1 in place and let dry. This will hold the wood in place during the next steps.
10. Drill a hole through the side of the shadow box and into the 1-by-1. Repeat on the other side and screw the 1-by-1 into place.
11. Replace the lamp housing and strap on the 1-by-1, lining it up with the drilled holes and screw into place.
12. Decide where you want your cord to come from and drill a notch large enough for the cord to fit through so your box doesn't rock as you work.
13. Add the light bulb and you are finished!
