Turn a ale can into an ash tray.
Stout cans, very as soda cans, can arrange a energetic and disposable ash tray for your after collection or yet for Day-to-day utilize. Whether you keep an empty bitter can and some scissors, you are husky on your expedient to moulding an ash tray. This tray can hold other uses too, allied a coin holder, candle holder or much a sweet tray.5. Fold the strips at a 90 degree angle, outward, away from the can.6. Fold one at a sharp angle near the center of the can so that the strip will overlap the bottom of the strip next to it.
Wash absent the can thoroughly with soap and saturate. Let the can dry.
2. Assign on your gloves.
3. Cut off the top of the can, about a fourth of the way down the can. This will leave you with an exposed can.
4. Cut strips down the side of the can, so they parallel each other towards the bottom. Where you end your cuts near the bottom of the can will determine how deep of a tray you will end up with. If you want a deep tray, don't cut as far down. If you want a shallow tray, cut further down. The number of strips you cut is up to you. The more strips you cut, the more intricate the design will be endure. The less you cut, the less intricate it will be.
Stab using at variance types of ale cans for a discrepancy of colours. Experiment with differential edged scissors or with how many strips you abbreviate to receive differential designs.
Instructions
1.You want the end of the folded strip to be flush with the furthest side of the strip next to it. If it is not, either cut it to make it flush or fold the excess under the strip it is being folded over.
7. Continue this with every strip around the can.
8. Fold the last strip under the pocket of the strip that it's being folded over, to secure it. You may have to trim the last strip's edge to make it easier to fit under the folded edge.
