When you are creating your architectural sketch, allure away a drafting map of your project. This requires mapping outside all of the intricate base point on a 2-D effigy so designers and interpretation workers can easily accept it. Moreover, allure a model of the composition so common people who don't compass the melancholy print visualization skills can gaze what the mannequin Testament look like.
Start Off With Pencil
No matter how many different times you have created an architectural blue print design, start off with pencil. This is because it is easy to incorrectly measure a certain area, and if you draw the line in pen you may have just ruined hours of work. You can white it out and draw over it, but this will instantly lose some of the professionalism because a large smear of white will be over the grid paper. Once the project has been finished in pencil, proceed by drawing over it in ink. Once the ink has been finalized, go over the grid paper with an eraser. Make sure the ink you are using is waterproof. Nothing is worse than taking time to draw out a concept design, only to have it smear when the water color paint is applied.
Shading
This is because the concept design does not need to be precise. A ruler will be handy, though, in keeping the lines crisp, but is not necessary. Typically, use a wash of water color over your design; after you have completed the ink outline, allow it plenty of time to dry. This will help remove any of the graphite left over from the pencil.
Concept Design
Create your concept design, which is the image anyone will be able to look at and see what you want you building to look like, in ink first.Add shading to the concept design to help bring forth texture and depth. There are many different ways to shade in shadows. The first is cross-hatch shading. This technique is where you build up depth by crossing diagonal lines in the darker areas. The closer together the lines are, the darker the image will be. Do not use a ruler for this---you want the cross hatching to look organic. You can also use stippling. Stippling is where you take the tip of your pen and make small dots in the shadow area. The closer the dots are together, the darker the shadow. This also adds interesting texture to your design. Traditional blending can be used where the shadow gradually goes from light to dark; however, it does not add as much texture to the drawing. Typically, you want to create a mood or feel with your design; using a textured shading technique will help you accomplish this.
