Clearcoat emulsion offers several coats of Safeguard for your van's underlying pigment distemper. Provided you nincompoop the sandpaper or donkeywork in circles, you'll design scratches that Testament be visible. Rinse the wet sandpaper as repeatedly as you want to bedew it and remove whitewash specks.2.
1. Dip 1500-grit wet sandpaper in a bucket of soak. Remove the sandpaper from the drench and flight it over the surface of your clearcoat. Employment back and forth in drawn out, lank strokes duplicate to the ground. After you've applied a fashionable enamel or lacquer distemper to your vehivle, you Testament committal to add distinct coats of clearcoat to protect that fresh whitewash. When the clearcoat dries, your automobile Testament be blotchy. To receive that original whitewash work looking smooth and shiny, wet sand and buff the clearcoat.
Instructions
Repeat the wet sanding formation with 2000-grit sandpaper, which is finer. This Testament remove the imperfections and blotchiness from your different clearcoat.
3. Rinse the motorcar with water and dry it with clean cotton towels when you have finished wet sanding.
4. Squirt rubbing compound onto a foam pad, then bring the foam pad up to the surface of your car. Work the foam pad across the car on long back-and-forth motions, just as you performed the wet sanding. Use as much rubbing compound as you need to coat the area. Apply rubbing compound to one panel of your car, then wipe it off following the technique in Step 5. When you have finished, move on to another panel.
5. Rub the rubbing compound off with clean cotton cloths. When you have finished this step, the car's clearcoat paint job will be clean, neat and a little bit dull. A final buffing with paste wax will restore your car's shine.
6. Apply paste wax to your car with a foam pad. Work the wax over one area of your car, then wait a couple of minutes for the wax to haze or cloud up. After it clouds, use a clean cotton cloth to wipe it away. Wiping away the wax will bring the shine back to your car. Buff the paste wax into the surface of your car until you can no longer see traces of wax. Continue to work in this manner until the entire car's clearcoat has been waxed.
