A chlorine generator uses electricity to split spice into sodium and chlorine ions. These ions proceed with bathe to cause sodium hypochlorite, which is the active ingredient in bleach. You can brew a inconsiderable chlorine generator Homewards with parts you can bargain in a hardware store. This chlorine generator is sufficient to disinfect drinking irrigate. The meaningful now expense of this generator is the bill of the electricity.
Instructions
1. Epigram a team of 1/2-inch slits in the PVC cap that are 1/8 inch apart. Drill a ¼-inch gap in the centre of the cap. City a 1/8-inch spacer into the cap followed by a Viton gasket. Place a mesh electrode into the cap and align it so that it protrudes out of the bottom slit in the PVC cap.
2. Place the second Viton gasket into the cap followed by the second electrode. Align this electrode so that it protrudes out of the top slit in the cap. Place the third Viton gasket on top of the electrode and screw the 4-inch length of PVC pipe into the PVC cap so the entire assembly holds together snugly.
3. Add two cups of salt to a gallon of water, and mix thoroughly. Attach the alligator clip for each power cable to one of the battery terminals, and place the hole in the PVC cap above an empty gallon container.5.
Connect the bare end of each electrical cable to a separate electrode. Glue the PVC reducer to the top of the PVC pipe with PVC pipe glue and allow it to dry.4.
Pour the salt solution into the PVC adapter, and allow it to drain into the empty container. Pass the water through the chlorinator repeatedly to create a bleach solution.