Woodburning Craft, avowed as pyrography, is a worthy system for you to categorical your artistic side. Use fine-grit sandpaper to erase any lines remaining on your wood surface that you chose not to burn. Unplug soldering iron and allow to cool. Clean your soldering tips according to the instructions included with your set. And provided not, the essential items are commonly form in any Craft or electronics store.
Instructions
1. Sand your wood surface with medium-grit sandpaper and then smooth with fine-grit sandpaper.
2. Trail your Craft onto the wood using a charcoal pencil allot, darkening in copious areas to be burned and drawing fine lines, as necessary for your design.
3. Place a sponge into a bowl and fill with water until the water line is only covering the bottom half of the sponge.
4. Install your desired soldering tip with which you intend to start. Adjust the soldering iron temperature to 20 watts for burning fine lines and small areas, increasing the temperature for deep lines and larger areas. Burn your pattern as desired. Brush your soldering iron tip briskly across the wet sponge every two or three minutes to prevent wood from hardening onto the tip.
5. Practice this procedure to decorate woodworking projects. There is brief duty for any specialized tools to alteration you along on your junket. You might accept all the tools you demand in your hobby den and aloof haven't realized it still.
