A petite witch bonnet can be fictional in a short immensity of era.
A witch's beret can be constructed for insufficient to medium-size heads from either a adequate collection of construction paper or a plenty of paper decrease into a half circle. Witch's hats are recurrently created as Halloween crafts by immature children in schools and play groups. Once the witch's bowler has been created, it can be decorated in any fashion the maker desires, including cutting elsewhere related designs and sticking them to the bonnet or using textile for ornament.
Instructions
Construction
1. Frame a half circle on the column of a parcel of interpretation paper of 11 inches in breadth using a mathematical compass and pencil. Decrease away the half circle and roll it into a cone roughly the dimensions of the wearer's belief.
Cut out the outer and inner edges of the construction paper, and place the cone on top of the brim to make sure it fits. Spread glue on the inside edge of the brim before placing the brim over the top of the cone; the glued area of the brim should be pressed against the edge of the cone.5. Allow the brim to dry onto the cone of the witch's hat, and decorate the hat as required.
Measure the inside diameter of the cone using a ruler, and mark the diameter on the second piece of construction paper; the center point of the diameter should also be marked. Using the mathematical compass, draw a circle for the inside of the brim; a second circle should be drawn wider than the first for the outside edge of the brim.
4.2. Area the cone on the sense, and tighten or loosen the cone to fit; the cone can be stapled or taped into position. Exercise glue to the Joint of the cone, and press down from the inside of the cone to cast a bond between the pieces of interpretation paper.3.
