Installing your own outdoor mini-theater is a deviceful course of action to categorical your adulation for the page. Building a leaf makes hosting a theatre camp child's play. Additionally, outdoor stages are appealing To possess whether you're putting on plays during heated summer months. The trick to installing a happy outdoor mini-theater is to avail a helper to reinforcement you and to care for the page concentrated in a unmarried existence so that the sound of the actors projects back into the audience husky.
Instructions
1. Catch a 15-by-36-foot collection of land. Obtain the flattest division of the land to create the building growth as clear as feasible. A plot of land this proportions is goodly Sufficiently to embrace a 12-by-12-foot stage and freedom extent for an audience.
2. Degree and chop four 4-inch-by-4-inch-by-8-foot posts. Sand Everyone publicize using 80- to 120-grit sandpaper. Stain or dye Everyone advertise after sanding. Remit Day and night for the posts to dry. Situate the posts aside until Method 4.
3. Dig four display holes. Dig the headmost of four 8-inch-wide-by-18-inch-deep holes at the back left corner of the 12-by-12-foot folio sphere.
4. Degree, from this end, 3 feet in to the equitable, In relation to the center. Measure 2 feet back and mark that spot. Dig the second hole at that spot.
5. Measure out 3 feet to the right of this spot. Dig the third hole at this spot. Dig the final hole at the back right corner of the stage. You now have two holes at each back corner and two holes 3 feet in and 2 feet back behind the stage. Place the posts into the holes.
6. Mix concrete in a wheel barrel. Combine six spades gravel, four spades sand and two spades full of cement. Add 2 1/2 gallons of water gradually and stir until it is thoroughly mixed. Pour wet concrete into each hole to secure the posts.8. Bleach, sand and stain the panels. Brush laundry bleach onto the surface of each panel to remove wood stains.
Allow Day and night for the concrete to fully dry.7. Measure and cut three 4-by-10-foot plywood panels with a rotary saw. Allow two hours for the panels to dry.
9. Sand each panel with 80- to 120-grit sandpaper.
10. Brush wood stain onto the panels and allow 24 hours for them to dry.
11. Position the first panel between the first and second post. Install 1/2-inch screws into the panel every 6 inches down the body of the post. Continue the installation process in this manner until all panels are in place. You have now created an amphitheater wall that will project the sound of the actors back onto the audience.
12. Place the 12-by-12-foot plywood panel down as the stage floor. It can sit directly on top of the ground.
13. Construct a 2-by-4-inch wood frame to encase the stage. Cut two 2-by-4-inch-by-12-foot pieces of framing material and one 11-foot-by-8-inch piece of framing material.
14. Position the two 12-foot pieces on the outside of the plywood floor panel.
15. Place the 11-foot-by-8-inch piece at the front of the stage and secure the frame using 1/2-inch wood screws.
16. Layer the stage with comfort step padded floor fatigue mats (the kind that fit together like puzzle pieces) every time you perform to add cushion to your step and muffle the sound of thudding footsteps that might interfere with the production.
