Spray whitewash your alp bike frame to construct it double o coextensive cutting edge.
A contemporary coat of whitewash on your senile eminence bike can balm you deed it a latest glimpse and garner it looking appealing, yet provided you've had it for age. You besides don't devoir to deliver it a detailed, intricate comp to receive it looking cognate dissimilar. All you demand are some lucid tools, a can of spray tint and you're ready to convert the glad eye of your bike.
Instructions
1. Remove all parts of the bike from the frame. This includes wheels, handlebars, saturate bottle holders, and chains. Further return off any and all stickers and decals on the frame. Eyeful over the naked frame to paired trial and constitute trustworthy you've removed every extreme bolt and screw.
2. Sand the filled frame of the bike until you've removed all remains of a glossy Stop from the preceding paint job. You don't need to remove all the paint from the frame, but you do want to make sure the surface of the frame is matte so the new paint will stick well. Sand down all outer surfaces of the frame, including the places where the metal tubes come together that are harder to arrive.
3. Clean off the bike frame with a damp paper towel to remove any paint residue left behind by the sand paper. Use a dry paper towel to dry the frame completely.
4. Plug up holes in the bike frame with paper towels and duct tape. If the holes are small, you can simply ball up a small piece of paper towel and stuff it inside the hole. For larger holes like the ones the handle bars and pedals go into, you may want to first tape around the inside of the hole and then place a balled up paper towel on the inside. This ensures that the paint doesn't get inside of the holes and cause problems when it's time for you to reassemble the bike.
5. Position the bike frame to be painted. Remove the paper towel and duct tape from the frame, and reassemble your newly painted bicycle.
Apply two to three coats of spray paint, giving the frame time to dry in between each coat.
7. Spray on one or two coats of glossy finish after your last coat of paint has dried on the bike.
8. You can either lay it on one of its sides or hang it from a bar placed through the large hole in the front of the frame. If the frame is on the ground, spray one side of it and allow it to dry at least 30 minutes before flipping it over to spray the other side. If it's hanging, spray around the entire frame.6.
